D62-22 dieselhammer in 1:50 scale. This is the model that is intended for the swinging lead it has a starter mechanism and guides for the swinging lead. To make it it complete you also need to order the : 1 - Square hat D62 for pole 8MM for Swinging lead or Round hat D62 for 12MM pipe for Swinging box lead. 2 - The swinging lead assembly ( more info at the swinging lead parts ) 3 - Optional the square pole 8mm x 240 mm. Watch out. For the result as seen on the pictures the model need to be spray painted. Start with a thick layer of primer. When dry start sanding with waterproof sandpaper 500. Then another layer of primer and sanding again. Now the third layer of primer and some minor sanding. And finally the layer of paint. For finishing touch glue on some fuel lines ( thin black electrical wire ).