Even the Cat loves to eat his Ramen! Lunch Time! Set of Bookmarks
Week 50 of sharing Bookmarks - start off with some Ramen Add type Bookmarks.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Bambu Green (10501) Transmission Distance: 2 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Bambu Green (10501) At layer #12 (1.04mm) swap to Red (10200) At layer #17 (1.44mm) swap to Jade White (10100) for the rest.
























