This is a 1:8 scale replica of the dashboard wires terminal of the Back to the Future DeLorean A-car. Replaces part 48A. Specially designed for the 1:8 scale Eaglemoss DeLorean.

The design was made to be used with 0.28mm diameter wire, that's half as thin as the stock ones in order to preserve accuracy.

Paint instructions Prime the parts with Tamiya grey primer. Paint the whole terminal with black, then paint the contacts with Vallejo Steel (71065) and paint the crimp part of the contacts with blue. For the blue you can use Vallejo Blue Angel 71.090 for the blue parts mixed with a little bit of Vallejo White 71.119 to make the blue a little lighter.

Assembly The termial uses the same clips as the kit part. Just push it in from the sides, no screwing required. Do not push or exert any pressure on the contacts.

For more information on how to achieve an accurate wiring, check my manual by using the following link: https://tinyurl.com/3DynamicsBTTFwiring