Michael M
BooneCo3d1.6K followers
Follow
BooneCo3d
BooneCo3d
|
Image 1 of 5
Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 5
Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks 3d model
Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks 3d model
Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks 3d model
Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks 3d model
Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks 3d model
Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks 3d model

Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks

Subscribe for access starting at $10 USD
Get access to this model and 854+ more

Week 49 set 3 - Gotham thief from the batman comics.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Matte Matte Caramel (11803) Transmission Distance: 2 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Dark Blue (11602) At layer #14 (1.2mm) swap to Matte Caramel (11803) At layer #19 (1.6mm) swap to Beige (10201) for the rest.


Discussions

Sketches of the thief Catwoman from the DC Comic Universe - Fanart Bookmarks

14 downloads · 1 year ago in  and 
Michael M
BooneCo3d1.6K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 854+ more