Fan art set of Bookmarks - The evil smile of the dog-napping Curella de Vil
Week 49 set 1 - Disney villain Corella de Vil
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA Bambu Labs Basic Red (10200) Transmission Distance: 4 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Red (10200) At layer #11 (0.96mm) swap to Black (10101) At layer #14 (1.2mm) swap to Blue Grey (10602) At layer #18 (1.52mm) swap to Jade White (10100) for the rest.
























