Fan Art Manga Special - Dan Da Dan Anime set of Bookmarks
BonusWeek 48 - sharing some anime/manga fan art bookmarks. Including the regular version and a cut version that has rounded corners and a hole for a tassel. Bambu file.
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Maroon Red (10205) At layer #17 (1.44mm) swap to Beige (10201) At layer #23 (1.92mm) swap to Jade White (10100) for the rest.
























