Fly the Flag of Serenity - Firefly - hueforge Wall art design
Free Art sharing tonight centered around Firefly TV series and the Serenity Movie.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170.2x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #6 (0.56mm) swap to Maroon Red (10205) At layer #12 (1.04mm) swap to Yellow (10400) At layer #22 (1.84mm) swap to Jade White (10100) for the rest.
























