Third set for week 47. This is several depictions of masters of martial arts.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 PLA Bambu Labs Basic Turquoise (10605) Transmission Distance: 1 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #6 (0.56mm) swap to Pumpkin Orange (10301) At layer #13 (1.12mm) swap to Turquoise (10605) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.