This cute spider has a web shooter and flexible legs with magnets, so you can put it on the fridge door, or other metallic surface

All parts can be printed on a 220x220mm bed printer, except the web " PNZ_03" which needs to be printed on a 300x300mm bed printer.

For this model, you will need additional parts: 18mm Wobbly Googly Eyes - 2pcs Self-tapping screw 2.3x16mm - 1pc 10x3mm round magnet - 2pcs 4x2mm round magnet - 8pcs A spring from a pen (dimensions around 30x4.5mm) - 1pc

I also added some models for the eyes that you can print.

Assembling instructions:

1. Glue the Wobbly Googly Eyes
2. Glue the magnets on the body and the tip of the legs
3. Insert the "button" in the body (the clamp facing the back)
4. Insert the spring in the web hole
5. Insert the "PNZ_01" in the web hole 6, Insert and screw the 2.3x16mm self-tapping screw. 3D printing settings The Spider body "SPDR_01" doesn't need support The "Target" and "target leg" doesn't need support The Web stand "PNZ_O3" doesn't need support Use support for the web shot "PNZ_01" and for "button"

0.12mm Layer height recommended for high quality for the spider body 0.2mm Layer height for the rest of the parts 3 Wall loops recommended for strength 20% Infill density

Check out my other designs, you might find something you like.

If you want to print and sell this or any of my other designs, click 'Become a member' on my profile page.

COPYRIGHT PROTECTED FILES All designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.