Grumpy the dragon....Need I say more? He's a bit bigger than the baby dragons and full of attitude, just like my teenagers. He also hangs perfectly from the link before his legs.

This design has been tested down to 60% and as large as 169%.

Hand-painted dragons by @dragon.nanny on Instagram

Painted 3mf is included. Verify settings; what works for me may not necessarily be the correct setting for your printer. Verify flushing volumes. Make sure to start a new project.

Printing recommendations: .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints. Reduce acceleration and adjust overhang speeds as needed

Filaments: Polymaker Polychroma - Matte PLA Rainbow Polymaker PLA- Cold White Polymaker Polychroma - Twilight Polymaker PLA - Black Polymaker - Matte Green Cookiecad - Sunset Elixir

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give me a follow to keep up to date.

Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3