Artistic view of the spirit of the Lion - Set of Bookmarks
Week 46 is here. First up are some artistic bookmarks of lions.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.3x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 PLA Bambu Labs Matte Mandarin Orange (11300) Transmission Distance: 3.2 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Cyan (10603) At layer #14 (1.2mm) swap to Mandarin Orange (11300) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.
























