Spiral Weave Table Lamp

A twisted, flowing lattice that creates a dynamic, sculptural effect, giving the illusion of movement when illuminated.

🎨 Printing Tips:

Base

• No specific requirements for the base

Lamp Shades

• Print lamp shades at 100% infill!

• Print with flat side on the build plate.

• No supports are required for any parts!

🧰 Required Hardware

All you need is some super glue and a light source! This lamp is designed to work with the Bambu Lab LED Hardware kit, but it can work with other light sources <60 mm in diameter.

Where to get the LED Light

I bought a couple of the kits from Bambu Lab directly, but I also found knockoffs on Amazon for about $10. I got two. One had a dimmer and one didn't (Bambu's kit does not), and they both work well.

I have also found other knockoffs from [Aliexpress(https://www.aliexpress.us/item/3256807234255155.html?gatewayAdapt=glo2usa4itemAdapt) for less than $4. I ordered some of these, but I am still waiting to receive them so I can't speak to their quality yet.

📥 Included Files

• Licorice Diamond Lamp Shade
• Lamp Base
• Screw
• Retainer
• Base

🛠️ Assembly

• Put super glue in the circular cutout part of the lamp base

• Align the slot on the retainer with the slot on the base, and press/clamp. Wait until glue is dry to move to the next step.

• Put the light (light side up) into the bottom of the base.

• Screw the screw into the bottom of the base