Life in the Fastlane - sometimes it can slow down - Racing Hueforge Art
Last one for tonight - I was messing around and this picture was created. It processed great in hueforge and I had to share it.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 114.29x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Green (11501) Transmission Distance: 0.5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Dark Green (11501) At layer #14 (1.2mm) swap to Beige (10201)
Border Only Colors from here until the end. At layer #23 (1.92mm) swap to Jade White (10100) for the rest.






















