3rd Piece of art to be shared, for this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.84x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Red (10200) Transmission Distance: 4 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Red (10200) At layer #12 (1.04mm) swap to Orange (10300) At layer #15 (1.28mm) swap to Yellow (10400)

Border Only Colors from here until the end. At layer #21 (1.76mm) swap to Jade White (10100) for the rest.