The biker girl you didn't expect - Leather Jacket and all - Hueforge art
Another Art piece to share - for this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.84x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 5 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Blue Grey (10602) At layer #12 (1.04mm) swap to Orange (10300) At layer #16 (1.36mm) swap to Beige (10201)
Border Only Colors from here until the end. At layer #22 (1.84mm) swap to Jade White (10100) for the rest.






















