Week 44 is late, but I have returned and am sharing both tonight and tomorrow. Week 44 tonight that will be for March, and Week 45 tomorrow that will be for April.

Next up are some basketball themed bookmarks:

for these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Cobalt Blue (10604) Transmission Distance: 0.5 PLA Bambu Labs Matte Dark Red (11202) Transmission Distance: 0.2 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #6 (0.56mm) swap to Cobalt Blue (10604) At layer #9 (0.8mm) swap to Dark Red (11202) At layer #16 (1.36mm) swap to Jade White (10100) for the rest.