The bunnies are hard at work during the Strawberry Harvest - Set of bookmarks
Week 44 is late, but I have returned and am sharing both tonight and tomorrow. Week 44 tonight that will be for March, and Week 45 tomorrow that will be for April.
First up are some bunnies working hard.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Indigo Purple (10701) Transmission Distance: 2 PLA Bambu Labs Basic Pink (10203) Transmission Distance: 8 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Indigo Purple (10701) At layer #10 (0.88mm) swap to Pink (10203) At layer #16 (1.36mm) swap to Beige (10201) for the rest.
























