Commercial License STL File – Sun & Moon Celestial Art

Bring the cosmos to life with this breathtaking Sun and Moon Celestial Art STL file! This high-quality 3D design beautifully blends day and night, featuring a serene crescent moon embracing a radiant sun, surrounded by flowing clouds and twinkling stars. Perfect for 3D printing enthusiasts, artists, and businesses looking to display or sell unique, handcrafted prints.

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence. With this file, you're free to print and sell your finished prints without restriction—ideal for artists, small businesses, and online sellers.

Product Features:

• High-Quality STL Files: Each part of the model, from every ray of the sun to the moon, is separated into individual pieces for flawless color and detail.
• ** No AMS Required!:**
  Achieve stunning multi-color prints with simple filament swaps after each color—no AMS (Automatic Material System) needed.
• ** Easy to Print:** Print pieces by color. This saves time and filament. AND if any part has an issue, you can easily reprint the one piece you need versus reprinting the entire thing!
• ** Commercial License Included:** Print and sell as many as you’d like!
• ** Intricate Lunar Texture:** Realistic moon craters with a peaceful facial expression.
• ** Glowing Sun Design:** Flowing, sculpted sun rays for a bold, radiant look.
• ** Dimensional Details:** Floating stars and dreamy clouds add extra depth.
• ** Puzzle Assembly:** Pieces are designed to fit together for an easy, satisfying build. Glue Recommended if you will be hanging the piece or for permanent assembly.
• Fits Most Standard Printers: The largest piece is the moon and it is approximately 6.7 inches at its largest measurement at full size. If scaling down, you will need to adjust the x-y compensations.

Elevate your collection with this celestial masterpiece and start printing your Sun & Moon Art today!

---

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Assembly Note Some pieces need to be inserted through the back to fit through the openings. Also be aware of the star cut outs on the clouds and rays for alignment. The rays will fill in positions except the bottom ray because of the star cut out. Some rays may line up slightly better in different positions so you may need to play around with these as you assemble.

Assembled Dimensions at full size: Height: Approx 10.47” Width: Approx 11.89” Depth: Approx 2.69"

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Supports – YES for some pieces
• Support Type - TREE SLIM
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – AUTO – unless you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – NEAREST
• Infill – 15%
• Wall Loops - 2

Print Times with settings above:

1. Sun – 1 hour 54 minutes
2. Clouds – 2 hours 21 minutes
3. Connectors – 7 minutes
4. Large Rays – 2 hours 7 minutes
5. Small Rays – 32 minutes
6. Stars – 1 hour 48 minutes
7. Moon – 5 hours 34 minutes
8. Lashes – 4 minutes