Hippity hoppity poppity! Here comes Hopcorn!

There are two boxes and tops. The clicker top is a little tricky - if it's not lined up the top will get stuck a little, I put a little dot to help with orientation. You can remove the dot to save on purging, just remember how it came off the bed.

115% box size will fit two bunnies and the clicker.

The grooved box is for those who like to hand paint. One of the tops is hollowed out so you could make the box smaller or if you don't like the flat bottom top.

Painted 3mf included. Start a new project before opening the 3mf. Verify settings; what works for me may not necessarily be the correct setting for your printer. Verify flushing volumes.

Printing recommendations: .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints Reduce acceleration and adjust overhang speeds as needed

Filaments: Protopasta - Moonstruck White Satin Protopasta - Flekn' Fire Red Protopasta - Always Sunny Yellow Protopasta - Wonderblack Rainbow Glitter

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning:
NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3