Week 43 - first set is art deco tributes to the cat.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black Transmission Distance: 0.3 PLA Bambu Labs Basic Magenta (10202) Transmission Distance: 4.6 PLA Bambu Labs Basic Bronze (10801) Transmission Distance: 0.5 PLA Bambu Labs Basic White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Magenta (10202) At layer #12 (1.04mm) swap to Bronze (10801) At layer #17 (1.44mm) swap to White for the rest.