Celebrate Success! 3D Printable Graduation Decoration – Perfect for Gifts & Parties! Celebrate graduation day with this customizable Graduation Decoration STL file, designed for easy 3D printing! This decoration is perfect as a gift for graduates or as a stylish centerpiece for your graduation party. The model consists of multiple parts, allowing for easy printing and assembly without the need for an AMS (Automatic Material System). However, for those with an AMS, a two part multicolor AMS friendly version is also included for added convenience. Get ready to create a meaningful keepsake for the special graduate in your life!

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence.

Features:

• NO AMS REQUIRED: No AMS? No problem! Designed to work beautifully on single-color printers without the need for an Automatic Material Switching (AMS) system. All colors print separately as pieces. A fully assembled STL version (minus base) is also included if you would prefer using an AMS. You can easily paint the parts in slicer.
• Two Sizes Included: We have included two sizes to fit most standard print beds. The normal size one will work on beds with up to an 8 inch print area. The smaller version will work for print beds with up to a 6.8 inch print area. (Version 2)
• 3MF AMS Version Included: For those wishing to use an AMS, we have included a painted 3MF file already colored for you. Please note you will need to make sure your slicer has the colors applied correctly.
• Fit Together Pieces: As this was designed for single color printers, all pieces will fit together. However, glue is recommended to hold the model together permanently.
• Perfect for Gifts & Decor: Perfection for graduation day, graduation parties, or as a keepsake for your graduate!
• Commercial License Included: Print and sell as many as you’d like!
• Customizable: Print in your graduates colors to match their high school or college colors!

---

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Make graduation day even more special with this unique 3D printable decoration! Whether as a heartfelt gift or a stunning party centerpiece, this design is sure to impress. Download now and start printing—celebrate success in style!

Full Sized Assembled Dimensions: Height: Approx 5.75” Width: Approx 8.34” Depth: Approx 1.30"

Smaller Sized Assembled Dimensions: (Version 2) Height: Approx 4.90” Width: Approx 7.10” Depth: Approx 1.11"

PLEASE NOTE: Print tolerances may vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings as separate pieces. Filament used was PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Supports – NO
• Support Type - NONE
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim - NO – but recommended for small pieces or if you have adhesion issues
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – Nearest
• Infill – 15%
• Infill Pattern - Grid
• Wall Loops - 2

Print Times with settings above and printed as pieces at Full Size:

1. Base, Number Outline, Hat Accessories – Approx 1hr 26 min
2. Main Piece – 2 hours 10 min