Roman Centurion depiction in rough art style - Set of Bookmarks
A couple bonus sets of bookmarks being added tonight:
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Gray At layer #12 (1.04mm) swap to Black At layer #14 (1.2mm) swap to Red At layer #20 (1.68mm) swap to Ivory White for the rest.
























