Michael M
BooneCo3d1.6K followers
Follow
BooneCo3d
BooneCo3d
|
Image 1 of 4
The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 4
The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks 3d model
The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks 3d model
The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks 3d model
The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks 3d model
The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks 3d model

The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks

Subscribe for access starting at $10 USD
Get access to this model and 854+ more

Week 42 third Set - Aces High - Spades to win.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #17 (1.44mm) swap to Yellow for the rest.


Discussions

The Ace of Spades in the Card Killer Fire and Brimstone - Set of bookmarks

28 downloads · 1 year ago in 
Michael M
BooneCo3d1.6K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 854+ more