The warrior in armor amongst the cherry blossoms - hueforge art
Last model for this evening.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.84x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Ivory White At layer #14 (1.2mm) swap to Black At layer #15 (1.28mm) swap to Red At layer #16 (1.36mm) swap to Scarlet Red
Border Only Colors from here until the end. At layer #24 (2mm) swap to Ivory White for the rest.






















