VW classic car - The little Bug enjoying a day at the beach - Wall art hueforge
2nd bonus tonight is a bug.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.84x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Ice Blue At layer #13 (1.12mm) swap to Orange
Border Only Colors from here until the end. At layer #27 (2.24mm) swap to Jade White for the rest.






















