ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file. .......................................................................

I am very excited about adding to the Skeleton Dino collection with the Fully Print-in-Place Ankylosaurus. The skeleton dinos continue to be my most requested designs... which is great, because they are so fun to create. Especially this one, with the spiky texture and super flexi tail and body.

My son discovered the hilarious handstand feature that balances perfectly hahaha. A happy accident that really adds to the personality of this character.

Included are 4 files:

Ankylosaurus 3mf project file with both eye options Ankylosaurus STL with eyes Ankylosaurus STL with NO eyes Stand Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://thangs.com/designer/flexifactory

Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.

3D printing settings Easy Print

No Supports (adding supports will hinder functionality) Print-in-place STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project. I print with 15% infill/gyroid, .12 or .16 layer height for quality. As usual, make sure you have good adhesion, especially for the mini versions. I like to use an adhesion plate. Gradient PLA works well with this model Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.