Cute Little Fidget Dragon – Multi-Part 3D Printable STL (No AMS Required!) Bring a touch of magic to your desk with this adorable little dragon—designed to be more than just a display piece! This fun and functional model features a built-in clicker that works with most standard key switches, making it a perfect fidget toy or desk companion. Two versions are included – one with more rounded edges and one with a spikier finish. See photos – green has more rounded and pink has sharper edges. No AMS? No problem! This easy-to-print, single-extruder-friendly design assembles quickly without the need for multi-color printing. Want to use your AMS? A separate AMS-ready model is also included!

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence.

Features:

• NO AMS REQUIRED: No AMS? No problem! Designed to work beautifully on single-color printers without the need for an Automatic Material Switching (AMS) system. All colors print separately as pieces. A fully assembled STL version is also included if you would prefer using an AMS. You can easily paint the parts in slicer.
• Fit Together Pieces: As this was designed for single color printers, all pieces will fit together. However, glue is required to hold the model together.
• Perfect for Gifts & Decor: Brighten up your desk, table centerpieces, or your 3D print shop!
• Commercial License Included: Print and sell as many as you’d like!
• Two Versions Included: Two versions are included so you change choose which model you prefer.

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Whether you're printing for yourself or your shop, this little dragon is sure to be a hit!

Assembled Dimensions: Height: Approx 2.60” Width: Approx 2.41” Depth: Approx 2.82"

PLEASE NOTE: Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Supports – YES
• Support Type - TREE SLIM
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Remove Small Overhangs - yes
• Brim - YES - recommended for small pieces or if you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – Nearest
• Infill – 15%
• Wall Loops - 2

Print Times with settings above:

1. Body, Head and Neck – Approx 1hr 36 min
2. Eyes – 4 min
3. Spikes – 10.75 min
4. Belly – 4.5 min
5. Eye Highlights – 4 min