Bonus for this week - A drawing of a dragon.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #13 (1.12mm) swap to Beige At layer #20 (1.68mm) swap to Jade White for the rest.