Lost your toothpick on your Victorinox Swiss made pocket knife? Don't worry about it cause now you can print as many replacements as you need in as many colors as you desire! I've left the tip of the model fairly blunt so It may be sanded down to whatever sharpness you prefer.

Print settings I used:

• 0.10mm fine print settings
• PLA
• 100% infill (it likely will be 100% regardless depending on your normal settings)
• The model comes on its side which always printed the best for me
• Some trimming/sanding may be required depending on how good of a job your printer does. I have to sand the edges that touch the print bed.