Follow us on Instagram (sektor7_studios_3d)

Hello everyone :)

As we announces we want to present you our new Lamp. Our Origimi Lamp comes in a modern & timless design. The free-form shape gives the lamp a unique look that doesn't exist anywhere else. The lighting ambience is just great. Happy printing :)

SHORT PREVIEW OF THE LAMP: https://www.instagram.com/reel/DF8e5ZDIgNs/

WHAT DO YOU NEED? You need only a standard E14-Socket. (for example this one: https://amzn.eu/d/cIyh6AD)

VARIANTS OF THE LAMPSHADE:

• LAMPSHADE WITHOUT PATTERN (RECOMMEND)
• LAMPSHADE WITH PATTERN

HOME & LIVING COLLECTION https://than.gs/c/105672

MOUNTING INSTRUCTIONS:

• Print out the base, one of the lampshades and the lampshade-holder
• Be carfeul when you remove the supports from the lampshade-holder
• Be careful when you remove the lampshade from the print bed
• Place the lampshade on the lampshade-holder in the right position and click in the lampshade. This step requires some patience and skill.
• After you install the lampshade on the lampshade-holder you can place the assembly on the base. Insert the E14-Socket from below through the base and counter with the nut of the E14 socket.

RECOMMENDED PRINT SETTINGS (BASE)

• Printing Material: Bambulab PLA Matte (brown & grey)
• Nozzle: 0.4mm
• Infill: 10% (Gyroid or Grid)
• Layer Height: 0.2mm or 0.16mm
• Walls: 2
• Support Structure: None needed
• Brim: None needed (if adhesion problems occur, activate brim)
• Fuzzy Skin Settings: (Settings → Other → Fuzzy Skin)
• All Walls
• Fuzzy Skin Point Distance: 0.5mm
• Fuzzy Skin Thickness: 0.3mm

RECOMMENDED PRINT SETTINGS (LAMPSHADE HOLDER)

• Printing Material: Bambulab PLA Matte (brown, white & grey)
• Nozzle: 0.4mm
• Infill: 10% (Gyroid or Grid)
• Layer Height: 0.2mm or 0.16mm
• Walls: 2
• Support Structure: Needed
• Brim: None needed (if adhesion problems occur, activate brim)

RECOMMENDED PRINT SETTINGS (LAMPSHADE)

• Printing Material: Bambulab PLA Matte (brown, white & grey)
• Nozzle: 0.4mm
• Infill: 10% (Gyroid or Grid)
• Layer Height: 0.2mm or 0.16mm
• Walls: 2
• Support Structure: None needed
• Brim: None needed (if adhesion problems occur, activate brim)
• Fuzzy Skin Settings: (Settings → Other → Fuzzy Skin)
• All Walls
• Fuzzy Skin Point Distance: 0.3mm
• Fuzzy Skin Thickness: 0.2mm
• Vasemode Settings: (Settings → Other → Spiral Vase) → Activate

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

Greetings

Leon from Sektor 7 Studios