**Chonk the Dragon STL File – Your Adorably Fat 3D Print Buddy! ** Looking for the cutest and chubbiest little dragon to add to your collection? Meet Chonk the Dragon—the roundest, cutest, most lovable dragon you’ll ever print! This chunky little beast is designed for easy, multi-color printing with no AMS required—just print in different colors, glue the parts together, and boom! Instant chonky magic.

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence. Whether you’re crafting a thoughtful gift, decorating for Valentine’s Day, or making products to sell, this cute little snail is the perfect project to spread some love!

Features:

• NO AMS REQUIRED: Designed to work beautifully on single-color printers without the need for an Automatic Material Switching (AMS) system. All colors print separately as pieces. A fully assembled STL version is included if you would prefer using an AMS. You can easily paint the parts in slicer.
• Fit Together Pieces: As this was designed for single color printers, all pieces will fit together. However, glue is recommended to hold the model together.
• Perfect for Gifts & Décor Great for birthdays, decor, or just because!
• Commercial License Included Print and sell as many as you’d like!

** Due to the complexity of this print, it is recommended for those with sufficient 3D printing and assembly experience. **

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Get your Chonk the Dragon STL today and bring home the ultimate fat little dragon!

Assembled Dimensions: Height: Approx 8.44” Width: Approx 6.08” Depth: Approx 8.12"

PLEASE NOTE: Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate. Recommended Print Settings:

• Supports – YES
• Support Type - TREE or NORMAL
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Brim - YES - recommended for small pieces only or if you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – Nearest
• Infill – 15%
• Wall Loops - 2

Print Times with settings above:

1. Body and Arms – 2hr
2. Belly – 1hr 13 min
3. Body – 5hr 55 min
4. Wings and Scales – 1hr 20 min
5. Pupils – 2.75 min
6. Eye Whites and Teeth – 18.3 min