Valentine's Day is for all ages - The weathered Rose still shares Beauty - Set of Bookmarks
One more set tonight - this one is free to everyone. The rose that has challenged time often is the most precious.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #12 (1.04mm) swap to Dark Red At layer #17 (1.44mm) swap to Jade White for the rest.
























