Introducing the Cupcake Clicker Keychains!

Get ready to indulge in the sweetest fidget keychain ever! This adorable Cupcake Clicker is the perfect blend of fun, functionality, and irresistible charm. It's not just a keychain; it's a delightful little treat for your fingers!

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence.

Why You’ll Love It:

• NO AMS REQUIRED: Print each piece in your favorite colors without needing an AMS system! Simply swap filaments for a unique, eye-catching design. Two versions included - one for 4-color printing and another for a quick 3-color print!
• Commercial License Included: Sell your prints and share the joy! Your purchase includes a commercial license, allowing you to profit from your creations.
• OPTIONS!: You can print the base with or without attachment holes. You can also use a key clicker or print and glue without! Both bases are also included. There are also 2 different cupcakes! Both a three color and four color version included. The 3 color has more frosting and a larger cherry. The 4 color version has a cupcake base visible below the frosting and a smaller cherry.
• Irresistibly Clickable: Works with standard keyboard switches, this cupcake offers a satisfying click with every press. Perfect for fidgeting, stress relief, and adding a touch of playful personality to your keys or backpack.
• Easy Print and Assembly: Prints quickly and the parts fit together snugly. A touch of glue is recommended for permanent adhesion.
• Perfect Gift: Surprise your friends and family with this unique and charming gift! Ideal for birthdays, holidays, or just because.

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Don't miss out on this sweet treat! Grab your Cupcake Clicker Keychain STL file today and start printing! Limited time offer! (Okay, maybe not limited time, but you don't want to wait, do you?)

Dimensions at 100% Size Assembled (3 Color): Height: Approx 1.60” (depending on key switch) Width: Approx 1.47" Depth: Approx 1.47"

Dimensions at 100% Size Assembled (4 Color): Height: Approx 1.75” (depending on key switch) Width: Approx 1.75" Depth: Approx 1.75"

PLEASE NOTE: Print tolerances may vary by printer. The settings used in this print were using a 0.4 nozzle printed at 0.2 mm Draft settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Nozzle – 0.4 or smaller
• Supports - YES
• Support Type – NORMAL or TREE
• Threshold Angle - 30 degrees
• On Build Plate Only - YES
• Remove Small Overhangs - NO
• Top Z-Distance - 0.28 -Bottom Z-Distance – 0.28
• Layer Height: 0.2 or smaller
• Wall Loops – 2
• Infill – 15%

Print Times with settings above:

1. Base – 16.5min
2. Frosting (4 color print) – 15.25min
3. Frosting (3 color print) – 36min
4. Cupcake (3 color print) – 16.6min
5. Cherry (4 color print) – 3min
6. Cherry (3 color print) – 5min