Opening the Book on History and Fantasy, Dragons and Castles - Wall Art
Bonus art - first is a little bit different look at an open book.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x114.29mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Beige At layer #20 (1.68mm) swap to Jade White for the rest.






















