The two sides of Gotham - Batman and Joker - Fanart Set of Bookmarks
5th model for this week - a split view of Gotham's two halves - Batman and the Joker.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #12 (1.04mm) swap to Ice Blue At layer #17 (1.44mm) swap to Jade White for the rest.
























