GROWLOFT is a minimalist and modern planter with a stand and a drip tray. The file gives you 2 options: For fully 3D printed model or for a laser cut stand.

3D print: No supports or special settings needed. To avoid leaking, use PETG or ASA and increase the flow rate to 1.02, lower the layer height, slow down and use a scarf seam. There are 2 options for the base - use the one named more clearance if the parts are too tight and can not be inserted into another.

Laser cut: Use the 4 mm thick plywood. There are 2 options for the base - use the one named more clearance if the parts are too tight and can not be inserted into another.