.png&w=256&q=75)
Flush Big Thread 6mm Allen Key Multipoint (NOT folded).stl
42 downloads · 1 year ago · This is a ONE piece Flush Big Thread Multipoint for use with the multiboard eco system.
Prints 56% f
This is a ONE piece Flush Big Thread Multipoint for use with the multiboard eco system. Prints 56% faster than the folded version. I also changed it to be applied to a multiboard tile with a 6mm allen key, which makes it extremely easy to install.
Printing Guidelines: Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill (I use 25%), and no supports. Hex opening should be away from the print bed.
Tested holding 5lbs without a problem on a single point. 3-4 lbs should be no problem. Over that, use the folded version. Use at your own risk.
Flush Big Thread 6mm Allen Key Multipoint (NOT folded).stl
42 downloads · 1 year ago
Multipoint Flush Bolt-Locking Pack
Small Thread Multipoint Flush Mount Driver.step
Multipoint Rails - STL Remixing Files
Pegboard Click - Lite Multipoint Rail (Folded)
.png&w=3840&q=75)
dji mini 3 pro folded (3).stl
Multipoint One Piece Flush Big Thread Lite
6mm hex screw-in Flush Big Thread - Multipoint
Flush Large Thread - Fix Point (Folded)
Flush Large Thread - Lite Fix Point (Folded)
Bundle
R7Vault Savings Fund Wallet | Folded Bill | Custom Photo Insert Wallet (3D Print STL)
Foldable Mini Signs – Print-in-Place, Customizable STL
Pegboard Click - Rail (Folded)
Small Thread - Fix Point (Folded)
Large Thread - Fix Point (Folded)
Raised Heavy Weight-Bearing Hook Snap
Small Thread - Lite Fix Point (Folded)
Bolt-Locked Insert - Fix Point (Folded)
Large Thread - Lite Fix Point (Folded)
Folding Pocket Karambit
This is an excellent idea. Those folding ones sometimes break into pieces when folded. I prefer to print the lite versions in ABS which makes them pretty heavy duty.
Could you make a version of this for the small thread multipoint?