Bring Some Sunshine to Your Keys with This Fun Sunflower Clicker Keychain!

Brighten up your day (and your keychain or bag!) with this adorable Sunflower Clicker STL file! It can be a stand alone clicker or you can add a keychain or other attachment to customize your project. Perfect for gifts, stress relief, or just adding some flair to your keychain or backpack, this design is as functional as it is fun.

This isn’t just another sunflower—it’s a fidget-friendly masterpiece! The sunflower clicker uses standard keyboard switches to give you that oh-so-satisfying click every time you press it. Need to de-stress or keep your hands busy? This little gadget has you covered.

Features:

• NO AMS REQUIRED: Designed to work beautifully on single-color printers without the need for an Automatic Material Switching (AMS) system. All colors print separately as pieces.
• Commercial License Included: Feel free to print and sell your creations—this file is ready to help your business grow! A great seller for markets and shops!
• Fun & Functional: Features a satisfying click mechanism that uses standard keyboard switches. Fidget with it to your heart’s content!
• OPTIONS!: You can print the base with or without attachment holes. Both bases are included.
• Quick and Easy to Print: Designed for quick and easy prints single color and minimal supports.
• Simple Assembly: Snug-fitting parts that easily snap together—just add a dab of glue for a permanent hold.
• Eye-Catching Design: A charming sunflower that adds personality to your keys, backpack, or even your desk!

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

Whether you're crafting for fun, giving a gift, or boosting your shop’s lineup, this Sunflower Clicker Keychain STL file is exactly what you need. Don’t miss out—download it now and start printing happiness!

Dimensions at 100% Size Assembled: Height: Approx 1.25" - 1.30" (depending on key switch) Width: Approx 2.49" Depth: Approx 2.5"

PLEASE NOTE: Print tolerances may vary by printer. The settings used in this print were using a 0.4 nozzle printed at 0.2 mm Draft settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Nozzle – 0.4 or smaller
• Supports - YES
• Support Type - NORMAL
• Threshold Angle - 30 degrees
• On Build Plate Only - YES
• Remove Small Overhangs - YES
• Top Z-Distance - 0.28
• Layer Height: 0.2 or smaller
• Wall Loops – 2
• Infill – 15%

Print Times with settings above and only two colors:

1. Yellow Plate - 42.5 min (Petals, Connector and Top)
2. Brown Plate - 24.5 min (Bottom and Center)