Week 35 set 3 - Depictions of fire red eyes of dragons.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x66.89mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #17 (1.44mm) swap to Yellow for the rest.