High Fantasy depictions of the great and all powerful dragon - Set of bookmarks
Week 35 Set 2 - Dragons on the Plains.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x66.89mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #10 (0.88mm) swap to Beige At layer #15 (1.28mm) swap to Yellow for the rest.
























