Introducing the 3D-printable model of the Yasha, an iconic variant of the Tsunami Ashura sniper rifle from Cyberpunk 2077: Phantom Liberty! This model is adapted specifically for 3D printing and is divided into 63 parts, making it both detailed and accessible for assembly. Measurements: Length: 1000 mm Width: 250 mm Printing Specifications: The model is designed to fit on a printer with a print bed of 220x220 mm. The longest part is 220 mm, making it compatible with standard 3D printers. For the best visual result, it’s recommended to print the model in 4 colors: Black Red Gray Silver Assembly Tips: Each component is meticulously designed to snap or fit together with minimal post-processing. However, minor sanding may enhance fit quality where needed. We recommend using superglue for permanent connections and carefully aligning parts before gluing to maintain accuracy. Additional Notes: This model replicates the in-game aesthetic of the Yasha. Printing this model requires careful alignment and orientation of parts for optimal strength and detail. Assemble your own piece of Night City’s weaponry with this stunning replica of the Yasha! Feel free to reach out if you have any questions or feedback. Happy printing! 3D printing settings Layer Height: 0.1 - 0.2 mm (for best detail, especially on smaller parts) Infill Density: 15-20% for most parts; increase to 30-40% for structural parts that may need extra strength (such as the main body and connectors) Print Speed: 50-60 mm/s to ensure high-quality surface details Supports: Required for some parts, especially overhangs and complex geometry; use tree supports where possible for easier removal Bed Adhesion: Use a brim or raft if necessary to prevent warping on larger parts Filament Type: PLA or PETG recommended for durability; consider using filament in black, red, gray, and silver for the best color match to the in-game model