Cartoon Joker Home Man Cave Decor

We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).

The Second version is just the STL, the information will be below

If changing size, only change X and Y. Do not change Z

Being this file is more then 4 colors, we are providing a Non AMS option.

Project: Cartoon Joker.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.65x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic BambuLab Green Transmission Distance: 2

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Blue Gray

At layer #6 (0.56mm) swap to Black

At layer #7 (0.64mm) swap to BambuLab Green

At layer #9 (0.8mm) swap to Red

At layer #14 (1.2mm) swap to Jade White for the rest.