The rider in the sands - mirage of the hero cowboy - Hueforge art
This one is one of my favorite of late. a lone cowboy walking in the desert, with a mirage of him on a horse above.
For this model: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 115.09x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Red At layer #10 (0.88mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest.






















