Asian Artistic work - boat on the water with temples around - hueforge
A couple art pieces I am adding today. First is an orient style red ink sketch of a boat on a river.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.67x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #10 (0.88mm) swap to Red At layer #16 (1.36mm) swap to Jade White for the rest.
























