Fan art Masters of the Universe - Orko the mysterious Sorcerer
Reloading this one do to possible issues. Part of the last of the series from an artist friend who is a huge masters of the universe lover.
For this model: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.63x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Red At layer #10 (0.88mm) swap to Sakura Pink At layer #16 (1.36mm) swap to Jade White for the rest.






















