Anton T
Decorartor7.3K followers
Decorartor
Decorartor
|
Image 1 of 2
Make a Statement with Color and Creativity – Splash Vase 3d model
Decorartor
Decorartor
|
Image 1 of 2
Make a Statement with Color and Creativity – Splash Vase 3d model
Make a Statement with Color and Creativity – Splash Vase 3d model
Make a Statement with Color and Creativity – Splash Vase 3d model

Make a Statement with Color and Creativity – Splash Vase

The Splash Vase is a vibrant and dynamic design that brings a playful energy to any space. Featuring bold, fluid patterns in coral pink and deep blue, this vase is a true statement piece for modern interiors. Its flowing shapes resemble splashes of water or abstract art, making it a perfect blend of creativity and functionality.

Ideal for showcasing fresh flowers, dried arrangements, or standing alone as an artistic decor item, the Splash Vase is a celebration of color and movement. Whether placed in a living room, office, or studio, it adds a pop of bold personality and transforms any space into a gallery of modern design.

Community Makes (1)
Both versions were printed.  The smaller one (pink/blue) was printed in one pass but needed over 27 hours and had 1.5 cups of poop (even with poop > adjacent object).  The larger one (white/green) was done in PETG in about 15 hours, inlaying the green pieces with trimming the contact edge with a deburring tool.  A good result for both IMHO.
Both versions were printed.  The smaller one (pink/blue) was printed in one pass but needed over 27 hours and had 1.5 cups of poop (even with poop > adjacent object).  The larger one (white/green) was done in PETG in about 15 hours, inlaying the green pieces with trimming the contact edge with a deburring tool.  A good result for both IMHO.


Community Makes (1)
Both versions were printed.  The smaller one (pink/blue) was printed in one pass but needed over 27 hours and had 1.5 cups of poop (even with poop > adjacent object).  The larger one (white/green) was done in PETG in about 15 hours, inlaying the green pieces with trimming the contact edge with a deburring tool.  A good result for both IMHO.
Both versions were printed.  The smaller one (pink/blue) was printed in one pass but needed over 27 hours and had 1.5 cups of poop (even with poop > adjacent object).  The larger one (white/green) was done in PETG in about 15 hours, inlaying the green pieces with trimming the contact edge with a deburring tool.  A good result for both IMHO.

Discussions
Douglas M
bjdarch05
Both versions were printed. The smaller one (pink/blue) was printed in one pass but needed over 27 hours and had 1.5 cups of poop (even with poop > adjacent object). The larger one (white/green) was done in PETG in about 15 hours, inlaying the green pieces with trimming the contact edge with a deburring tool. A good result for both IMHO.
Both versions were printed.  The smaller one (pink/blue) was printed in one pass but needed over 27 hours and had 1.5 cups of poop (even with poop > adjacent object).  The larger one (white/green) was done in PETG in about 15 hours, inlaying the green pieces with trimming the contact edge with a deburring tool.  A good result for both IMHO. 3d model
PrinterBambu Lab A1
MaterialPLA
Layer height0.2 mm
Infill density15 %
SupportsTree

Make a Statement with Color and Creativity – Splash Vase

97 downloads · 1 year ago in  and 
Anton T
Decorartor7.3K followers