These press risers are designed to fit the leather stamps from my paid collection. The press risers add 1 cm of height and a wider surface area when pressing. I designed these primarily for people who use an arbor press instead of a leather press. You can use these with a leather press as well. The leather stamp sits in the corresponding press riser. Place the press where you want it on the material, add the press riser and then press the material. These are very helpful when you want more pressure when stamping, especially with smaller presses.

The 45mm press riser fits 40mm and 45mm leather stamps.

I print all leather stamps with 4 walls at 50% triangular infill at 10% moisture. Anything less can result in failure of the wall structures.

A rigid filament is recommended, such as PLA+, CF PLA etc. Cheap PLA doesn't work well. If that's all you have, add an extra wall line for increased rigidity.

Stamps can be used for other fabrics and materials. I recommend testing a small piece before stamping any expensive materials. I dampen leather before stamping for a better impression.

Remix to your heart's desire, these are designed to be personalized.

Dry your filament, eat your vegetables, don't do drugs.