A collection of remixable blank leather stamps in 40mm, 45mm, 50mm, 55mm, 65mm, 75mm, 85mm and 100mm diameters.

I print all leather stamps with 4 walls at 50% triangular infill at 10% moisture. Anything less can result in failure of the wall structures.

A rigid filament is recommended, such as PLA+, CF PLA etc. Cheap PLA doesn't work well. If that's all you have, add an extra wall line for increased rigidity.

Stamps can be used for other fabrics and materials. I recommend testing a small piece before stamping any expensive materials. I dampen leather before stamping for a better impression.

Remix to your heart's desire, these are designed to be personalized. I recommend a minimum 2.5mm outer wall thickness from the edge of the outer perimeter to the extrusion for better rigidity and wall strength. A 0.4mm nozzle works best, but the stamps can be successfully printed with a 0.6 nozzle, just be watchful of very small lines, extrusions etc.

Dry your filament, eat your vegetables, don't do drugs.