A collection of 65mm leather stamps featuring lovable kittens and puppies. I will be adding to this collection so you will have more designs to choose from in the near future. One can never have too many kittens and puppies.

I print all leather stamps with 4 walls at 50% triangular infill at 10% moisture. Anything less can result in failure of the wall structures.

A rigid filament is recommended, such as PLA+, CF PLA etc. Cheap PLA doesn't work well. If that's all you have, add an extra wall line for increased rigidity.

Stamps can be used for other fabrics and materials. I recommend testing a small piece before stamping any expensive materials. I dampen leather before stamping for a better impression.

If you need the stamps in a different diameter, feel free to send me a message and I will resize them for you. NOTE - resizing some designed to a smaller diameter may result in poor details, loss of image clarity. I'll see what I can do.

Remix to your heart's desire, these are designed to be personalized. I recommend a minimum 2.5mm outer wall thickness from the edge of the outer perimeter to the extrusion for better rigidity and wall strength. A 0.4mm nizzle works best, but the stamps can be successfully printed with a 0.6 nozzle, just be watchful of very small lines, extrusions etc.

Dry your filament, eat your vegetables, don't do drugs.