Hey Everyone, Hope You Enjoy This White Cat Hueforge We Made, This And Everything Else We Have Created Are Available For Personal And Commercial Use On Our Patreon, You Only See 10% Here On Thingiverse! patreon.com/DENUSA

We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).

The Second version is just the STL, the information will be below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x240mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Jade White for the rest.

Print Settings Printer brand: Bambu Lab

Printer: A1

Filament brand: bambu

Filament material: PLA

Notes: Follow Instructions In Description.